Antifouling

Molia has black antifouling paint which needs renewal before we launch. But which one to choose?

In 2016 Practical Boat Owner (PBO) tested 20 different paints in 13 UK locations. The results are online here. They did not actually test in the Bristol Channel – so I chose a paint that did well in South Wales.

I will let you know how it performs in the waters between Dartmouth and Portishead!

Application

The hull was pressure-washed when Molia was lifted out of the water, and the existing surface is clear of any growth and the condition of the surface is good.

Wet and dry sandpaper (I used a 180 grit) all over, then masking off the waterline. Well stirred paint. Application with a small roller takes just over one hour per side on Molia, and almost all of a 2.5 litre can.

My favourite bit (centre) is painting the keel and its bulb.